UV LED Spot
Multi-channel UV LED controllers and compact spot heads for precise, high-intensity curing of adhesives on small parts.
3 models
UV LED curing systems for industry
Industrial UV curing, in seconds, not minutes.
UV LED spot, linear and area systems, curing ovens, conveyors and radiometers that cure adhesives, coatings and inks on electronics, semiconductor, battery, display and medical device lines.
- 20,000 h+ LED life
- 365 to 405 nm
- 100 % QC tested
Products
A curing geometry for every process
From a 2 mm spot on a camera module to a full-width conveyor line, choose the light source that matches your parts, materials and cycle time.
UV LED Linear
Line-shaped UV LED light sources, from 10 mm to 1,350 mm long, for curing bond lines and for curing across a moving web or conveyor.
10 models
UV LED Area
UV LED flood heads that cure a whole area at once, fan-cooled from 20 × 20 mm to 400 × 400 mm, plus water-cooled heads for high-intensity production lines.
26 models
Ring LED
Ring-shaped UV LED lamps that cure all the way around cylindrical and round parts in a single exposure, without shadows.
1 model
UV Lamp Spot
Mercury lamp spot curing systems that deliver broad-spectrum UV through flexible light guides.
1 model
UV Curing Oven
Enclosed UV LED chambers for shielded batch curing of parts, samples and small series, plus UV tape curing systems for wafers.
5 models
UV Conveyor
Benchtop and floor-standing conveyors that carry parts through a shielded UV tunnel for continuous, repeatable curing.
6 models
UV Radiometer
Handheld and inline meters that measure UV irradiance and dose, so you can set up, verify and document every curing process.
6 models
Applications
Proven in demanding industries
From camera modules and catheters to wafers, battery electrodes and display modules, our systems cure fast and repeatably, with little heat.
Electronics
Fast, low-heat UV LED curing for bonding, staking, sealing and coating in electronics assembly, from single components to whole boards.
Optics
Precise, controllable UV LED curing for bonding lenses, prisms and mirrors and assembling camera lenses and optical instruments.
Optical Fibre Communication
Low-heat, high-irradiance UV LED curing for fibre arrays, connectors, transceiver optics and fibre coatings.
Medical devices
Fast, low-heat curing of UV adhesives in medical device assembly, from catheters and tubing sets to needles, masks and housings.
Printing
Instant-on UV LED curing for inks and varnishes in inkjet, label, screen, offset and coding applications, without mercury or ozone.
Coatings and Adhesives
Energy-efficient, mercury-free UV LED curing of coatings and adhesives on film, wood, plastics, metal and glass.
Semiconductor
Uniform, low-heat UV for wafer tape release, chip packaging, protective coatings and exposure, at precisely defined wavelengths.
Automotive
Fast, controllable UV curing for bonding and sealing automotive parts, integrated with the PLC on automated lines.
Photovoltaics
Wide linear and area UV LED sources with uniform output and air or water cooling, for large substrates on continuous lines.
Why Awellcure
Built by specialists, backed in Europe
Awellcure's founder has worked in UV curing for nearly 20 years. Light sources, control electronics and software are developed in-house, and every system is assembled and tested in-house before it ships.
Product
One manufacturer for the whole curing process, from the light source to measurement.
- UV LED spot, linear and area systems
- UV lamp spot curing and ring lights
- Curing ovens, chambers and conveyors
- Radiometers to verify every line
Quality
Consistent output, shift after shift, with LEDs selected for performance and life.
- 100 % QC test before shipping
- High irradiance from imported UV LEDs
- Cold light without infrared heat
- Low power consumption
Service
Advice before you buy and support after installation, in your time zone.
- Exclusive international Sales Representative
- Sales Contacts reachable by phone and email
- Locations in Shanghai, Shenzhen, Chongqing and Vietnam
- Help choosing wavelength, optics and irradiance
Awellcure in numbers
A focused UV curing manufacturer
Figures for the Manufacturer, Awellcure Shanghai UV Group, and its Shenzhen subsidiary.
- Employees
- 80+
- At the Shanghai group and its Shenzhen subsidiary
- R&D staff
- 20+
- In electronic, optical and mechanical design
- Customers
- 1,500+
- Companies the Manufacturer works with
- Sales and service locations
- 4
- Shanghai, Shenzhen, Chongqing and Vietnam
Request a quote
Tell us about your curing process
HuNan Create E-commerce Co., Ltd., Awellcure's exclusive international Sales Representative, answers every Inquiry personally. Share your parts, materials and cycle time, and you will receive a recommended system and a quotation.