Image 1 of 2: AF3050H1 UV LED irradiator head in a black housing with a D-sub connector and honeycomb vent
UV LED AreaAF3050H1
UV LED flood head with a 30 × 50 mm emitting area and up to 5,000 mW/cm² peak irradiance, driven by a programmable controller with PLC and RS232 control.
Prices, lead times and technical advice on request.
A rectangular 30 × 50 mm field at up to 5,000 mW/cm² covers small assemblies, flex circuits and multi-part fixtures in a single exposure.
It keeps the high irradiance of the smallest head while covering a wider field, so short cure times are possible on slightly larger parts.
Each system pairs the AF3050H1 irradiator head with a controller that sets irradiance, exposure time and step programmes. Because the LEDs switch on instantly and emit no infrared, the head cures exactly when the part is in place and leaves heat-sensitive substrates unaffected.
Compact heads suit bonding, sealing and encapsulating individual components in microelectronics, optics and optical fibre communication, and assembling medical devices.
| Wavelength | 365 / 385 / 395 / 405 (±5) nm |
|---|---|
| Emitting area | 30 × 50 mm |
| Peak irradiance | 5,000 mW/cm² |
| Recommended working distance | 10 mm |
| LED lifetime at 80 % power | 20,000 h |
| Cooling | Fan |
| Operating temperature | 0 to 45 °C |
| Storage conditions | −10 to 60 °C, 30 to 85 % RH |
| Head cable | 2 m as standard, custom lengths on request |
Higher irradiance and custom emitting areas are available on request.
| Supply voltage | 100 to 240 V AC |
|---|---|
| Power cord | 2 m |
| Housing | Black sheet steel |
| Cooling | Fan |
| Control inputs | Touch screen, foot pedal, RS232, PLC |
| Irradiance adjustment | 10 to 100 % |
| Irradiation modes | Manual; timed (0.1 to 999.9 s); step (1 to 20 steps of different power and time); pulse (single or continuous cycle) |
| Communication | RS232 serial port and I/O interface, read and write |
| Operating temperature | 0 to 45 °C |
| Storage conditions | −10 to 60 °C, 30 to 85 % RH |
AF2020H1
UV LED flood head with a 20 × 20 mm emitting area and up to 5,000 mW/cm² peak irradiance, driven by a programmable controller with PLC and RS232 control.
AF2080H1
UV LED flood head with a 20 × 80 mm emitting area and up to 6 W/cm² peak irradiance, driven by a programmable controller with PLC and RS232 control.
AF6060H1
UV LED flood head with a 60 × 60 mm emitting area and up to 3,000 mW/cm² peak irradiance, driven by a programmable controller with PLC and RS232 control.
Request a quote
Tell us about your parts, adhesive and cycle time. Our Sales Contacts reply with a recommended configuration and a quotation.
