Image 1 of 2: AF100100H1 UV LED irradiator head in a black housing with its square emitting window lit
UV LED AreaAF100100H1
UV LED flood head with a 100 × 100 mm emitting area and up to 1,500 mW/cm² peak irradiance, driven by a programmable controller with PLC and RS232 control.
Prices, lead times and technical advice on request.
A square 100 × 100 mm field at up to 1,500 mW/cm² cures a whole circuit board, a tray of small parts or a coated sample in one exposure.
The fan-cooled head mounts above a workstation or a fixture, and the controller sets irradiance, exposure time and step programmes.
Each system pairs the AF100100H1 irradiator head with a controller that sets irradiance, exposure time and step programmes. Because the LEDs switch on instantly and emit no infrared, the head cures exactly when the part is in place and leaves heat-sensitive substrates unaffected.
Mid-size fields suit curing whole circuit boards, optical assemblies and fixtures of small parts in one exposure, as well as industrial adhesives and coatings and ink drying on packaging and labels.
| Wavelength | 365 / 385 / 395 / 405 (±5) nm |
|---|---|
| Emitting area | 100 × 100 mm |
| Peak irradiance | 1,500 mW/cm² |
| Recommended working distance | 10 mm |
| LED lifetime at 80 % power | 20,000 h |
| Cooling | Fan |
| Operating temperature | 0 to 45 °C |
| Storage conditions | −10 to 60 °C, 30 to 85 % RH |
| Head cable | 2 m as standard, custom lengths on request |
Higher irradiance and custom emitting areas are available on request.
| Supply voltage | 100 to 240 V AC |
|---|---|
| Power cord | 2 m |
| Housing | Black sheet steel |
| Cooling | Fan |
| Control inputs | Touch screen, foot pedal, RS232, PLC |
| Irradiance adjustment | 10 to 100 % |
| Irradiation modes | Manual; timed (0.1 to 999.9 s); step (1 to 20 steps of different power and time); pulse (single or continuous cycle) |
| Communication | RS232 serial port and I/O interface, read and write |
| Operating temperature | 0 to 45 °C |
| Storage conditions | −10 to 60 °C, 30 to 85 % RH |
AF2020H1
UV LED flood head with a 20 × 20 mm emitting area and up to 5,000 mW/cm² peak irradiance, driven by a programmable controller with PLC and RS232 control.
AF3050H1
UV LED flood head with a 30 × 50 mm emitting area and up to 5,000 mW/cm² peak irradiance, driven by a programmable controller with PLC and RS232 control.
AF2080H1
UV LED flood head with a 20 × 80 mm emitting area and up to 6 W/cm² peak irradiance, driven by a programmable controller with PLC and RS232 control.
Request a quote
Tell us about your parts, adhesive and cycle time. Our Sales Contacts reply with a recommended configuration and a quotation.
