Image 1 of 2: AFL-10x3 UV LED linear head in a compact black housing with a slot-shaped emitting window and cable
UV LED LinearAFL-10x3
Compact UV LED line head with a 10 × 3 mm emitting area and 500 to 5,000 mW/cm² peak irradiance, for fine bond lines.
Prices, lead times and technical advice on request.
The smallest linear head in the range concentrates up to 5,000 mW/cm² on a 10 × 3 mm line. Its compact housing fits close to the part in assembly fixtures, so it can cure narrow bond lines and seals on small components such as sensors, connectors and optical parts.
Each system pairs the AFL-10x3 irradiator head with a controller that sets irradiance, exposure time and step programmes, and one controller can drive several heads. The LEDs switch on instantly and emit no infrared, so the head cures exactly when the material is in place and leaves heat-sensitive substrates unaffected.
UV LED linear systems bond and seal in microelectronics, optics and optical fibre communication, assemble medical devices, cure industrial adhesives and coatings, dry inks on packaging and labels, and cure varnishes on flooring and furniture.
| Wavelength | 365 / 385 / 395 / 405 (±5) nm |
|---|---|
| Emitting area | 10 × 3 mm |
| Peak irradiance | 500 to 5,000 mW/cm² |
| Recommended working distance | 10 to 15 mm |
| Power consumption | < 50 W |
| LED lifetime at 80 % power | 20,000 h |
| Cooling | Fan |
| Operating temperature | 0 to 45 °C |
| Storage conditions | −10 to 60 °C, 30 to 85 % RH |
| Head cable | 2 m as standard, custom lengths on request |
| Supply voltage | 100 to 240 V AC |
|---|---|
| Power cord | 2 m |
| Housing | Black sheet steel |
| Cooling | Air |
| Control inputs | Touch screen, foot pedal, RS232, PLC |
| Irradiance adjustment | 10 to 100 % |
| Irradiation modes | Manual; timed (0.1 to 999.9 s); step (1 to 20 steps of different power and time); pulse (single or continuous cycle) |
| Communication | RS232 serial port and I/O interface, read and write |
| Operating temperature | 0 to 45 °C |
| Storage conditions | −10 to 60 °C, 30 to 85 % RH |
AFL-15x5
Compact UV LED line head with a 15 × 5 mm emitting area and 500 to 5,000 mW/cm² peak irradiance, sized for short bond lines and seals.
AFL-50x10
Fan-cooled UV LED line head with a 50 × 10 mm emitting area and 2,500 mW/cm² peak irradiance, driven by a programmable controller.
AFL-100x10
UV LED line head with a 100 × 10 mm emitting area and 2,500 mW/cm² peak irradiance for curing edges, seams and parts on small conveyors.
Request a quote
Tell us about your parts, adhesive and cycle time. Our Sales Contacts reply with a recommended configuration and a quotation.
