Image 1 of 2: Round aluminium Awellcure-M1000 UV energy meter with an LCD showing mJ/cm² and an on/off toggle switch
UV RadiometerM1000
Flat puck-style UV energy meter, calibrated at 365 nm, that records peak irradiance, instantaneous irradiance and accumulated dose in the curing zone.
Prices, lead times and technical advice on request.
The M1000 is a compact puck radiometer for checking UV LED curing systems. Switch it on, check that the display reads zero, then place it in the curing zone in place of a part: it records the dose in mJ/cm² together with peak and instantaneous irradiance. The flat aluminium housing tolerates short exposures up to 110 °C.
Because it is calibrated at 365 nm and measures in the UVA band, the M1000 suits 365 nm UV LED systems. For 395, 405 or 450 nm sources, choose the M2000 or M3000.
Use the M1000 to set up new UV LED processes, check curing stations at regular intervals and record measured dose as evidence of process stability, wherever adhesives, coatings and inks are cured.
| Spectral range | UVA, 320 to 390 nm |
|---|---|
| Calibration wavelength | 365 nm |
| Irradiance range | 0 to 10,000 mW/cm² |
| Dose range | 0 to 9,999 J/cm² |
| Accuracy | ±5 % |
| Temperature range | 0 to 75 °C |
| Heat exposure limit | 110 °C for up to 10 s |
Zero the meter before each measurement. Annual recalibration is recommended.
| Dimensions (Ø × H) | 90 × 13 mm |
|---|---|
| Weight | approx. 500 g |
| Housing | Aluminium alloy |
| Power supply | High-energy lithium battery |
| Auto power-off | After 60 s without signal |
| Operating temperature | 0 to 45 °C |
M2000
Handheld UV energy meter with a round probe on a cable that measures peak irradiance, instantaneous irradiance and dose, with sensors for 365, 405 or 450 nm.
M3000
One-piece Ø 120 mm puck radiometer whose display shows dose, irradiance and temperature together, with sensors for 365, 405 or 450 nm.
IEI-Fastcure 250 / 251
Handheld UV radiometers sold under the IEI-Fastcure name, with a separate probe and the same published measuring range as the M2000.
Request a quote
Tell us about your parts, adhesive and cycle time. Our Sales Contacts reply with a recommended configuration and a quotation.
