UV ConveyorA-H350120
Benchtop UV LED conveyor with a 350 mm belt and a choice of compact LED heads, one controller driving several heads, for adhesive curing on small parts.
Prices, lead times and technical advice on request.
The A-H350120 is a benchtop conveyor built around compact UV LED area heads rather than a full-width lamp. Choose a 100 × 100, 100 × 150 or 50 × 150 mm head to match the parts, and add further heads on one controller when the process needs more dose or a wider path across the 350 mm belt.
It is designed for UV adhesive curing and accepts external start signals, so it can work stand-alone or in a semi-automatic or fully automatic line. The touch screen shows belt speed and internal temperature, and both the lamp height and the photoelectric sensor height adjust to the parts. For a single head covering the whole belt width, choose the AWM1-ZM12040.
Curing UV adhesives on small electronic, optical and medical device components that pass in a defined track under the LED head.
| Light output area | 100 × 100 / 100 × 150 / 50 × 150 mm |
|---|---|
| Wavelength | 365 / 385 / 395 / 405 nm |
| LED heads | 1 as standard, more on request |
| LED chips | Seoul, Korea |
| LED lifetime | ≥ 20,000 h |
| Cooling | Air |
| External dimensions (L × W × H) | 1,200 × 410 × 1,530 mm |
|---|---|
| Belt (L × W) | 1,200 × 350 mm |
| Belt material | PTFE mesh |
| Inlet width | 400 mm |
| Inlet height, adjustable | 30 to 200 mm |
| Belt speed | 0 to 10 m/min |
| Belt emergency stop | Yes |
| Housing | Sheet steel and aluminium, silver |
| Net weight | 10 kg |
| Light source control | Touch screen |
|---|---|
| Belt speed adjustment | Knob |
| Lamp triggering | Photoelectric sensor; always-on mode for parts too low to detect |
| Supply voltage | 100 to 240 V AC, 50/60 Hz |
| Power consumption | < 50 W |
| Ambient temperature | −10 to 50 °C |
| Relative humidity | 25 to 80 % RH |
Compact benchtop UV LED conveyor in three models with 150 or 340 mm PTFE belts, for developing inks, varnishes and adhesives and for small production series.
AWM1-ZM12040
Benchtop UV LED conveyor whose 350 × 100 mm curing area spans the full 350 mm belt at 1,500 mW/cm², ready for semi-automatic or automatic lines.
AWM1-ZM10040
Benchtop conveyor with a 3 kW mercury UV lamp for broadband curing from 200 to 450 nm, with a 400 mm belt and a 300 mm long curing zone.
Request a quote
Tell us about your parts, adhesive and cycle time. Our Sales Contacts reply with a recommended configuration and a quotation.
