Image 1 of 3: White AWM1-ZM10040 UV mercury lamp conveyor with a lamp housing and exhaust fan above a mesh belt, and an operating panel with ammeter, hour meter and speed controller
UV ConveyorAWM1-ZM10040
Benchtop conveyor with a 3 kW mercury UV lamp for broadband curing from 200 to 450 nm, with a 400 mm belt and a 300 mm long curing zone.
Prices, lead times and technical advice on request.
This benchtop conveyor uses a 3 kW mercury lamp instead of UV LEDs. Its broadband output from 200 to 450 nm, peaking at 365 nm, suits UV adhesives, inks, varnishes, paints and coatings formulated for mercury lamps. Parts travel on a 400 mm PTFE belt through a 300 mm long curing zone, with shaded sections on both sides that keep stray UV inside the tunnel.
The operating panel carries an ammeter and hour meter for the lamp, a lamp switch and a belt speed controller for 1 to 10 m/min. A fan above the lamp housing removes heat, and the inlet height adjusts from 0 to 100 mm to suit the parts.
Curing UV adhesives, inks, varnishes, paints and coatings in optical communication, photovoltaics, medical devices, consumer electronics and PCB assembly, on optical parts and displays, and in materials laboratories.
| Light source | 1 × 3 kW UV mercury lamp |
|---|---|
| Wavelength | 200 to 450 (peak 365) nm |
| UV intensity | 80 W/cm |
| Curing length | 300 mm |
| Shading length, each side | 100 mm |
| Curing height | 330 mm |
| Cooling | Fan |
| External dimensions (L × W × H) | 1,900 × 650 × 955 mm |
|---|---|
| Belt (L × W) | 1,000 × 400 mm |
| Belt material | PTFE mesh |
| Inlet width | 400 mm |
| Inlet height, adjustable | 0 to 100 mm |
| Inlet and outlet length | 250 mm |
| Belt height above floor | 395 mm |
| Belt speed, adjustable | 1 to 10 m/min |
| Belt emergency stop | Yes |
| Housing | White sheet steel |
| Net weight | 160 kg |
Curing, shading, inlet and outlet lengths and belt height are taken from the dimension drawings.
| Supply voltage | 220 V AC, 50/60 Hz |
|---|---|
| Ambient temperature | −10 to 50 °C |
| Relative humidity | 25 to 80 % RH |
Compact benchtop UV LED conveyor in three models with 150 or 340 mm PTFE belts, for developing inks, varnishes and adhesives and for small production series.
AWM1-ZM12040
Benchtop UV LED conveyor whose 350 × 100 mm curing area spans the full 350 mm belt at 1,500 mW/cm², ready for semi-automatic or automatic lines.
A-H350120
Benchtop UV LED conveyor with a 350 mm belt and a choice of compact LED heads, one controller driving several heads, for adhesive curing on small parts.
Request a quote
Tell us about your parts, adhesive and cycle time. Our Sales Contacts reply with a recommended configuration and a quotation.
